National Instruments PXIe-5663E, Начало работы

Страница: 19 / 25

5. Associate the hardware modules that comprise your device.
1. Select the NI 5601 that is identified as not configured in the
configuration tree.
2. In the Associated Devices section, select the appropriate module from
each system component drop-down listbox.
For the NI 5663E, you must associate the NI 5622 IF digitizer module and
the NI 5652 LO source module with the NI 5601 RF downconverter.
3. Click
Save
in the MAX toolbar.
Note
Module associations may be lost when you move the modules
to different chassis slots.
6. Self-test the device modules by selecting the modules in the configuration
tree, and clicking
Self-Test
in the MAX toolbar. Repeat this step for all
modules in your NI 5663E system.
The MAX self-test performs a basic verification of hardware resources.
Software Locations
Table 13.
Locations of NI-RFmx Software
ADE Location
LabVIEW
Available on the LabVIEW Functions palette at
Measurement I/O
>
NI-
RFmx
.
LabWindows/CVI
NI-RFmx functions are available from the LabWindows/CVI
Library
menu
at
Library
>
RFmx SpecAn Library
and
Library
>
RFmx Demod Library
.
Microsoft Visual C/C++ Use the header files located in the
<NIDir>\Shared\ExternalCompilerSupport\C\include directory and import
library files located in one of the following directories:
■
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)—
<NIDir>\Shared\ExternalCompilerSupport\C\include
■
Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit):
■
32-bit installation—
<NIDir>\Shared\ExternalCompilerSupport\C\lib32\msvc
© National Instruments
19
PXIe-5663E Getting Started