or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by NI could
void your authority to operate it under your local regulatory rules.
Notice
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories. The length of all I/O cables must be no longer than
3 m (10 ft).
Notice
This product may become more sensitive to electromagnetic disturbances
in the operational environment when test leads are attached or when connected to a
test object.
Verifying the System Requirements
To use the PXIe-5172, your system must meet certain requirements.
For more information about minimum system requirements, recommended system
requirements, and supported application development environments (ADEs), refer to the
readme for your selected software support. Readmes are available on the driver software
media or online at
Unpacking the Kit
Notice
To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
4.
Verify that you received the following contents.
•
PXIe-5172 Module
•
PXIe-5172 Getting Started Guide
•
Maintain Forced-Air Cooling Note to Users
•
NI-SCOPE Note to Users
•
Instrument Design Libraries for Reconfigurable Oscilloscopes Note to Users
2
|
ni.com
|
PXIe-5172 Getting Started Guide