National Instruments PXIe-5172, Руководство по началу работы, Страница: 13 / 16

Making a Measurement with Instrument Design
Libraries
You can verify proper installation and configuration of your device by making a measurement
using a LabVIEW sample project.
This measurement requires installation of the instrument design libraries.
1.
Launch LabVIEW.
2. Select File » Create Project .
3. On the left side of the Create Project window, select Oscilloscopes .
4. On the right side of the Create Project window, select the Stream to Host (PXIe-5172)
sample project and click Next .
5. Specify a name, location, and device target for the project in the Create Project window
and click Finish .
6. In the project tree, navigate to My Computer » Project Documentation , open the
.html
file, and navigate to the Running this Sample Project section of the documentation.
7. Follow the instructions in the project documentation for making the measurement.
Troubleshooting
If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit
ni.com/support .
What Should I Do if the PXIe-5172 Doesn't Appear in
MAX?
1. In the MAX configuration tree, expand Devices and Interfaces .
2. Expand the Chassis tree to see the list of installed hardware, and press <F5> to refresh
the list.
3. If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4. Navigate to the Device Manager.
Option Description
Windows 10 Right-click the Start Menu icon and select Device Manager .
Windows 8 Right-click the Start screen and select All apps » Control Panel »
Hardware and Sound » Device Manager .
Windows 7 Select Start » Control Panel » Device Manager .
PXIe-5172 Getting Started Guide | © National Instruments | 13