National Instruments PXIe-5170 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 18

National Instruments PXIe-5170 Скачать руководство пользователя страница 7

Windows users may see access and security messages during installation. Accept the
prompts to complete the installation.

Note

For troubleshooting information, contact NI technical support or visit

ni.com/support

.

7.

When the installer completes, restart your system.

Installing the PXIe-5170/5171

Caution

To prevent damage to the PXIe-5170/5171 caused by ESD or

contamination, handle the module using the edges or the metal bracket.

You must install the software before installing the hardware.

Before you install the hardware, refer to the guidelines in the

Maintain Forced-Air Cooling

Note to Users

included in the PXIe-5170/5171 kit to ensure that the PXIe-5170/5171 can cool

itself effectively. This document is also available at

ni.com/manuals

.

The PXIe-5170/5171 is a single-slot module with one backplane connector. The module may
be installed into any PXI Express-compatible slot.
1.

Ensure the AC power source is connected to the chassis before installing the
PXIe-5170/5171. The AC power cord grounds the chassis and protects it from electrical
damage while you install the PXIe-5170/5171.

2.

Power off the chassis.

3.

Inspect the slot pins on the chassis backplane for any bends or damage prior to
installation. Do not install a module if the backplane is damaged.

4.

If the chassis has multiple fan speed settings, ensure the fans are set to the highest setting.

Note

Inadequate air circulation could cause the temperature inside the chassis

to rise above the optimal operating temperature for the PXIe-5170/5171,
potentially causing thermal shutdown, shorter life spans, or improper
performance.

5.

Position the chassis so that inlet and outlet vents are not obstructed.

For more information about optimal chassis positioning, refer to the chassis
documentation.

6.

Remove the black plastic covers from all the captive screws on the module front panel.

7.

Identify a supported slot in the chassis. The following figure shows the symbols that
indicate the slot types.

PXIe-5170/5171 Getting Started Guide

|

© National Instruments

|

7

«
...
5
6
7
8
9
...
»

Содержание PXIe-5170



















Отзывы:

Нет отзывов