National Instruments PXIe-5170 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 18

National Instruments PXIe-5170 Скачать руководство пользователя страница 4

Optional Items

•

PXI Slot Blocker kit (NI part number 199198-01)

•

SMA (m)-to-SMA (m) coaxial cables, RG-402, 50 Ω, 1 M (NI part number 781845-01)

•

SHH19-MH19-AUX shielded single-ended cable, 1 M (NI part number 784091-01)

•

SCB-19 connector block (NI part number 783959-01)

Visit

ni.com

for more information about these additional items.

Preparing the Environment

Ensure the environment in which you are using the PXIe-5170/5171 meets the following
specifications.

Operating environment

Ambient temperature range

0 °C to 45 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2. Meets
MIL-PRF-28800F Class 3 low temperature
limit and MIL-PRF-28800F Class 4 high
temperature limit.)

Relative humidity range

10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)

Maximum altitude

2,000 m (800 mbar) (at 25 °C ambient
temperature)

Pollution Degree

2

Indoor use only.

Caution

You can impair the protection provided by the PXIe-5170/5171 if you use

it in a manner not described in this document.

Note

For complete specifications, refer to the specifications document for your

device at

ni.com/manuals

.

Choosing the Software

Software Options

NI provides multiple software options for interacting with the PXIe-5170/5171: NI-SCOPE
soft front panel (SFP), NI-SCOPE instrument driver software, and the instrument design
libraries.

4

|

ni.com

|

PXIe-5170/5171 Getting Started Guide

«
...
2
3
4
5
6
...
»

Содержание PXIe-5170



















Отзывы:

Нет отзывов