GETTING STARTED GUIDE
PXIe-4480/4481
6-Channel, 24-bit, 1.25 MS/s DSA Analog Input
This document explains how to install, configure, and set up the PXIe-4480 and PXIe-4481
Dynamic Signal Acquisition (DSA) analog input modules. Driver support for these modules was
first available in NI-DAQmx 16.1. For a list of devices supported by a specific release, refer to
the
NI-DAQmx Readme
, available on the version-specific download page or installation media.
Contents
Electromagnetic Compatibility Guidelines .............................................................................. 1
Unpacking the Kit..................................................................................................................... 2
Preparing the Environment....................................................................................................... 3
Verifying the Kit Contents ....................................................................................................... 3
Other Equipment............................................................................................................... 3
Installing the Software.............................................................................................................. 4
Installing the Hardware ............................................................................................................ 4
Configuring the Hardware in MAX.......................................................................................... 7
Connecting Signals ................................................................................................................... 8
Connecting RJ50 Cables................................................................................................... 9
Connecting BNC Cables................................................................................................... 9
Connecting mXLR Cables................................................................................................ 10
Environmental Management..................................................................................................... 10
Worldwide Support and Services ............................................................................................. 11
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in locations with a controlled electromagnetic environment.
However, harmful interference may occur in some installations, when the product is connected
to a peripheral device or test object, or if the product is used in residential or commercial areas.
To minimize interference with radio and television reception and prevent unacceptable
performance degradation, install and use this product in strict accordance with the instructions
in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
