National Instruments PXIe-4357, Процедура калибровки

Страница: 1 / 10

CALIBRATION PROCEDURE
NI PXIe-4357
This document contains information about calibrating National Instruments PXIe-4357
SC Express modules using NI-DAQmx. For more information about calibration, visit
ni.com/
calibration
.
Contents
Software Requirements............................................................................................................. 1
Documentation Requirements .................................................................................................. 2
Calibration Interval................................................................................................................... 2
Test Equipment......................................................................................................................... 2
Test Conditions......................................................................................................................... 3
Calibration Procedure ............................................................................................................... 3
Initial Setup....................................................................................................................... 3
Connecting the Calibrator to the Module ................................................................. 4
Verification....................................................................................................................... 5
4-Wire Accuracy Verification .................................................................................. 5
Adjustment Procedure ...................................................................................................... 7
Specifications............................................................................................................................ 9
Where to Go for Support .......................................................................................................... 10
Software Requirements
Install NI-DAQmx 9.5 or later on the calibration computer. NI-DAQmx includes high-level
function calls to simplify the task of writing software to calibrate modules. You must have the
proper module driver installed on the calibration system before calibrating the module.
Note
NI recommends that you install the NI-DAQmx driver software before
physically installing the NI PXIe-4357. NI-DAQmx, available at
ni.com/
downloads
, configures and controls the NI PXIe-4357.
NI-DAQmx supports a number of programming languages, including LabVIEW,
LabWindows
™
/CVI
™
, C/C++, C#, and Visual Basic .NET.
ni.com/manuals
Deutsch Français