USER GUIDE
PXIe-416x Noise Filter
Accessory
Noise Filter Accessory for the PXIe-4162/PXIe-4163
This document explains how to install and use the PXIe-416
x
Noise Filter Accessory with a
PXIe-4162/PXIe-4163 source measure unit (SMU)—collectively referred to as the PXIe-416
x
—and includes PXIe-416
x
Noise Filter Accessory specifications.
Read this document and the documents listed in the
Additional Resources
section about
installation, configuration, and operation of this product before you install, configure, operate,
or maintain this product. Users are required to familiarize themselves with installation and
wiring instructions in addition to requirements of all applicable codes, laws, and standards.
The PXIe-416
x
Noise Filter Accessory is used to modify the behavior of the
PXIe-4162/PXIe-4163 SMU when the module is used in remote sense mode.
Caution
Observe all instructions and cautions in the user documentation. Using
the product in a manner not specified can damage the product and compromise the
built-in safety protection.
Attention
Suivez toutes les instructions et respectez toutes les mises en garde de la
documentation d'utilisation. L'utilisation du produit de toute autre façon que celle
spécifiée risque de l'endommager et de compromettre la protection de sécurité
intégrée.
Notice
This device is intended for use only with the PXIe-4162/PXIe-4163 SMU.
For more information about the PXIe-4162/PXIe-4163, refer to
Contents
