![background image](http://html1.mh-extra.com/html/national-instruments/pxie-4147/pxie-4147_getting-started-manual_3605853005.webp)
For more information about optimal chassis positioning, refer to the chassis
documentation.
5.
Remove the black plastic covers from all the captive screws on the module front panel.
6.
Identify a supported slot in the chassis. The following figure shows the symbols that
indicate the slot types.
Figure 2. Chassis Compatibility Symbols
NI PXIe-1062Q
1
2
3
4
5
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
PXIe-4147 modules can be placed in PXI Express peripheral slots, PXI Express hybrid
peripheral slots, or PXI Express system timing slots.
7.
Touch any metal part of the chassis to discharge static electricity.
8.
Ensure that the ejector handle is in the downward (unlatched) position.
9.
Place the module edges into the module guides at the top and bottom of the chassis. Slide
the module into the slot until it is fully inserted.
Figure 3. Module Installation
2
3
NI PXIe-1075
1
1. Chassis
2. Hardware Module
3. Ejector Handle in Downward (Unlatched) Position
10. Latch the module in place by pulling up on the ejector handle.
PXIe-4147 Getting Started Guide
|
© National Instruments
|
5