NI-DNET Hardware and Software for Windows
2
ni.com
Install the NI-DNET Software Before the Hardware
Before installing the NI-DNET software, first log on as
Administrator
or as a
user with Administrator privileges. The NI-DNET setup program must have
Administrator privileges because the program modifies the configuration registry
of your system.
Complete the following steps.
1. Insert the
NI-DNET Software for Windows
CD into your CD-ROM drive.
The installer launches if your CD-ROM drive plays data CDs automatically.
If the installer doesn’t launch automatically, navigate to the CD using
Windows Explorer and launch the
autorun
file from your
NI-DNET Software
for Windows
CD.
2. The Installation Wizard guides you through the necessary steps to install the
NI-DNET software. You can go back and change values where appropriate by
clicking
Back
. You can exit the setup where appropriate by clicking
Cancel
.
3. If you have LabVIEW Real-Time (RT) installed on your system, download
the NI-DNET driver support for your Real-Time PXI controller. Launch
Measurement & Automation Explorer (MAX) and follow the online help to
download NI-DNET Real-Time components to your Real-Time PXI
controller.
4. Power off your computer when the setup is complete.
section.
