©
National Instruments Corporation
1-1
PXI-PCI 8330 Series User Manual
1
Introduction
This chapter describes the PXI-PCI 8330 Series, lists what you need to
get started, and explains how to unpack and set up your hardware. The
four products in this series are the PCI-8330, the PXI-8330, the PCI-8335,
and the PXI-8335. The PXI-PCI 8330 Series incorporates MXI-3
technology. The terms
MXI-3
,
MXI-3 card
and
MXI-3 system
in this
manual refer to both the PCI MXI-3 and PXI MXI-3 cards and systems,
unless otherwise noted.
About the MXI-3 System
Description and Features
MXI-3 is a PCI master/slave system implementing the PCI-PCI bridge
register set. It couples two physically separate buses with either a copper or
fiber-optic data link capable of 1.5 Gbit/s serial data rates. With the MXI-3
system, you can do the following:
•
Control a PXI/CompactPCI backplane with either a PCI or
PXI/CompactPCI host system
•
Increase the available number CompactPCI or PXI slots for your
application
•
Physically separate the measurement or automation system from the
host PC
•
Combine PCI, CompactPCI, and PXI devices in the same system
Note
Your MXI-3 card will work in any standard CompactPCI chassis adhering to the
PICMG CompactPCI 2.0 R2.1
specification.
Large System Size
You can use MXI-3 to control PXI-PCI devices on up to 255 buses from
any PCI-based system, provided the BIOS supports such a configuration.
You can use either a daisy-chain or a star configuration, with maximum
bus-to-bus distances of 10 meters (copper cable) or 200 meters (fiber-optic
cable).
Содержание PXI-8335
Страница 1: ...PXI 8335...
