National Instruments PXI-7340, Руководство пользователя и технические характеристики, Страница: 15 / 57

2-4
|
ni.com
Chapter 2 Configuration and Installation
Caution The NI 7340 motion controller is a sensitive electronic device shipped in
an antistatic bag. Open only at an approved workstation and observe precautions for
handling electrostatic-sensitive devices.
Note When adding or removing a motion controller, you must be logged on with
administrator-level access. After you have restarted the system, you may need to
refresh Measurement & Automation Explorer (MAX) to view the new controller.
PXI Motion Controllers
1. Power off and unplug the chassis.
Caution To protect yourself and the computer from electrical hazards, the
computer must remain unplugged until the installation is complete.
2. Choose an unused peripheral slot and remove the filler panel.
3. Touch a metal part on the chassis to discharge any static electricity.
4. Insert the NI 7340 motion controller into the PXI slot as shown in Figure 2-1. Use the
injector/ejector handle to fully secure the device into place.
Figure 2-1. Installing an NI 73xx Motion Controller in a PXI Chassis
5. Attach the front panel of the NI 73xx motion controller to the front panel mounting rails of
the chassis with the slot screws on the chassis.
Caution Make sure you have correctly connected all safety devices before you
power on the motion system. Safety devices include inhibits, limit switches, and
emergency shut down circuits.
1 PXI Chassis
2 PXI System Controller
3 NI 73xx Motion Controller
4 Front-Panel Mounting Screws
5 Module Guides
6 Power Switch
3
PXI-1000B
5
6
2
4
1