National Instruments PXI-5610 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 26

National Instruments PXI-5610 Скачать руководство пользователя страница 17

2.

In the configuration tree, double-click

Devices and Interfaces

to see the list of installed

devices.

Note

If you are using the NI 5672 with the LabVIEW Real-Time Module,

expand

Remote Systems

. Find your target IP address or name, expand it, and

then expand

Devices and Interfaces

.

Installed devices appear under the name of their associated chassis.

3.

Expand your

Chassis

tree item.

MAX lists all devices installed in the chassis. Your default device names may vary.

Note

If you do not see your device listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure
the device is correctly installed, and restart.

4.

Record the device identifier MAX assigns to the hardware. Use this identifier when
programming the NI 5672.

5.

Associate the hardware modules that comprise your device.
a)

Select the NI 5610 that is identified as not configured in the configuration tree.

b)

In the Associated Devices section, select the appropriate module from each system
component drop-down listbox.

For the NI 5672, you must associate the NI 5610 RF upconverter module with the
NI 5442 AWG module.

c)

Click

Save

in the MAX toolbar.

Note

Module associations may be lost when you move the modules to

different chassis slots.

6.

Self-test the device modules by selecting the modules in the configuration tree, and
clicking

Self-Test

in the MAX toolbar. Repeat this step for all modules in your NI 5672

system.

The MAX self-test performs a basic verification of hardware resources.

Related Information

Interconnecting the NI 5672 Modules

Refer to the NI RF Signal Generators Help for information about renaming devices.

NI PXIe-5672 Getting Started Guide

|

© National Instruments

|

17

«
...
15
16
17
18
19
...
»

Содержание PXI-5610



























Отзывы:

Нет отзывов