© National Instruments
|
2-7
PXI-1036/PXI-1036DC User Manual
4.
Connect the keyboard, mouse, and monitor to the appropriate connectors. Connect devices
to ports as required by your system configuration.
5.
Power on the chassis. Verify that the controller boots. If the controller does not boot, refer
to your controller user manual.
Figure 2-4 shows a PXI controller installed in the system controller slot of a
PXI-1036/PXI-1036DC chassis. You can place CompactPCI or PXI modules in any other slot.
Figure 2-4.
NI PXI Controller Installed in a PXI-1036/PXI-1036DC Chassis
1
PXI-1036/PXI-1036DC Chassis
2
Injector/Ejector Rail
3
NI PXI Controller
1
2
3
NI PXI-1
036
