Chapter 2
Installation and Verification
PCMCIA Serial for Windows 98/95
2-6
©
National Instruments Corporation
Figure 2-5.
Device Manager Ports List for PCMCIA Serial Card Incorrectly Installed
Verify the Hardware Resources
For every port of the newly installed serial interface, double-click on
the name of the serial port in the Device Manager. Then, click on the
Resources
tab. If the resources were assigned correctly, the
Resources
page shows which resources are assigned to your serial ports.
If Windows 98/95 did not assign any resources to the port, the
Resources
page shows only a
Set Configuration Manually
button. Click on the
Set
Configuration Manually
button and try to assign conflict-free resources
to your serial hardware. For instructions, refer to the
section of Appendix D,
. You might have to free an interrupt request level so
that one can be assigned to your serial hardware. For instructions, refer to
the section
Freeing an Interrupt Request Level
in Appendix D,
Troubleshooting and Common Questions
.
When you have finished verifying the hardware resources, proceed to the
next section.
Содержание PCMCIA Serias
Страница 1: ...PCMCIA 485 2...
