manualshive.com logo in svg

National Instruments PC-TIO-10, Руководство пользователя, Страница: 13 / 121

Поделиться
Скачать
National Instruments PC-TIO-10 Скачать руководство пользователя страница 13

Introduction

Chapter 1

PC-TIO-10 User Manual

1-2

© National Instruments Corporation

The timing circuits on the board make the PC-TIO-10 useful for the following operations:

•

Wave and pulse generation

•

Frequency shift keying (FSK)

•

Pulse-width measurement

•

Time-of-day counting and alarm generation

•

Event counting

The digital I/O lines on the PC-TIO-10 interface the PC to the following:

•

BCD-compatible panel meters and test equipment

•

Opto-isolated, solid-state relays and I/O module mounting racks

The PC-TIO-10 turns the PC into a timing and digital I/O system controller for applications in
laboratory testing, production testing, and industrial process monitoring and control.

What Your Kit Should Contain

The contents of the PC-TIO-10 kit (part number 776452-01) are listed as follows.

Kit Component

Part Number

PC-TIO-10 board
PC-TIO-10 User Manual
NI-DAQ software for DOS/Windows/LabWindows, with manuals

NI-DAQ Software Reference Manual for DOS/Windows/LabWindows
NI-DAQ Function Reference Manual for DOS/Windows/LabWindows

181195-01
320292-01
776250-01
320498-01
320499-01

If your kit is missing any of the components, contact National Instruments.

Your PC-TIO-10 is shipped with the NI-DAQ software for DOS/Windows/LabWindows.
NI-DAQ has a library of functions that can be called from your application programming
environment.  These functions include routines for analog input (A/D conversion), buffered data
acquisition (high-speed A/D conversion), analog output (D/A conversion), waveform generation,
digital I/O, counter/timer, SCXI, RTSI, and self-calibration.  NI-DAQ maintains a consistent
software interface among its different versions so you can switch between platforms with
minimal modifications to your code.  NI-DAQ comes with language interfaces for Professional
BASIC, Turbo Pascal, Turbo C, Turbo C++, Borland C++, and Microsoft C for DOS; and Visual
Basic, Turbo Pascal, Microsoft C with SDK, and Borland C++ for Windows.  NI-DAQ software
is on high-density 5.25 in. and 3.5 in. diskettes.

Содержание PC-TIO-10


























































































































Отзывы:

Нет отзывов