National Instruments PC-DIO-96/PnP, Руководство пользователя

Страница: 131 / 136

Index
PC-DIO-96/PnP User Manual I -3
©
National Instruments Corporation
PC-DIO-96/PnP hardware configuration
base I/O address and interrupt
selection, 2-3
plug and play, 2-3
control words
Port C set/reset control words (table), D-6
written to CNFG Register
mode 1 strobed input (figure), D-15
mode 1 strobed output (figure),
D-17 to D-18
mode 2 operation, D-21
control-word formats
82C53 Register Group (figure), D-7
82C55A Register Group (figure), D-5
CPA<7..0> signal (table), 3-3
CPB<7..0> signal (table), 3-3
CPC<7..0> signal (table), 3-3
CTR1 bit, D-10
CTRIRQ bit, D-10
custom cabling for PC-DIO-96/PnP,
1-5 to 1-7
customer communication, xiii, F-1 to F-2
D
DATA signal
description (table), 3-13
mode 1 input timing (figure), 3-14
mode 1 output timing (figure), 3-15
mode 2 bidirectional timing (figure), 3-16
data transceivers, 4-2
digital I/O connector. See also signal
connections.
pin assignments (figure), 3-2
theory of operation, 4-4
digital I/O power-up state selection,
3-9 to 3-12
high DIO power-up state, 3-9 to 3-10
low DIO power-up state, 3-11 to 3-12
digital I/O specifications, A-1 to A-2
digital logic level specifications, A-1
digital power-up state selection. See digital I/O
power-up state selection.
DIRQ0 bit, D-8
DIRQ1 bit, D-8
documentation
conventions used in manual, x-xi
National Instruments documentation, xii
organization of manual, ix-x
related documentation, xiii
DPA<7..0> signal (table), 3-3
DPB<7..0> signal (table), 3-3
DPC<7..0> signal (table), 3-3
E
electronic technical support, F-1 to F-2
e-mail support, F-2
environment specifications, A-2
equipment for PC-DIO-96/PnP, optional, 1-5
F
fax and telephone technical support, F-2
FaxBack support, F-2
FTP support, F-1
fuses
+5 V signal
comparison of PC-DIO-96/PnP and
PC-DIO-96 (table), E-1
protection fuse in series, 3-9,
4-4, A-2
self-resetting (table), 3-3
block diagram
PC-DIO-96, E-2
PC-DIO-96/PnP, 4-1
parts locator diagram
PC-DIO-96, E-3
PC-DIO-96/PnP, 2-1