manualshive.com logo in svg

National Instruments NI sbRIO-961 Series, Руководство пользователя

Поделиться
Скачать
National Instruments NI sbRIO-961 Series Скачать руководство пользователя страница 30

©

 National Instruments Corporation

29

NI sbRIO-961x/9612XT/963x/9632XT/964x/9642XT

Note

The analog input and analog output of the NI sbRIO-963

x

/9632XT/964

x

/9642XT

 

share an internal power supply. Putting the analog input into Sleep Mode turns off analog 
output as well. However, putting analog output into Sleep Mode does not turn off analog 
input.

Integrated Analog Output
(NI sbRIO-963

x

/9632XT/964

x

/9642XT

 

Only)

Connector J7 of the NI sbRIO-963

x

/9632XT/964

x

/9642XT provides 

connections for four analog output channels. Refer to the 

I/O and Other 

Connectors on the NI sbRIO Device

 section for a pinout of connector J7.

The integrated analog output of the NI sbRIO device is similar to that of the 
NI 9263, but there is no isolation. Each channel has a digital-to-analog 
converter that produces a voltage signal. Each channel also has overvoltage 
and short-circuit protection. Refer to the 

Specifications

 section for 

information about the overvoltage and short-circuit protection.

Figure 21 shows the analog output circuitry for one channel.

Figure 21.  

Analog Output Circuitry for One Channel

When you apply power to the NI sbRIO device, analog output channels are 
unpowered until data is written to them. When the channels receive the first 
data, they turn on and drive the output voltage configured in software. This 
behavior is similar to that of the NI 9263. Refer to the 

Specifications

 section 

for more information about power-on voltage. Refer to the software help 
for information about configuring startup output states in software.

AO

AO GND

Amplifier

DAC

Overvoltage/

S

hort-Circuit

Protection

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание NI sbRIO-961 Series























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды