slots or PXI Express Hybrid peripheral slots. Refer to the documentation for your chassis
for more information about slot types.
6. Touch any metal part of the chassis to discharge static electricity.
7. Ensure that the ejector handle is in the unlatched (downward) position.
8. Place the module edges into the module guides at the top and bottom of the chassis. Slide
the device into the slot until it is fully inserted.
Figure 3.
Module Installation
2
3
NI PXIe-1075
1
1. Chassis
2. Hardware Module
3. Ejector Handle in Down (Unlatched) Position
9. Latch the module in place by pulling up on the ejector handle.
10. Secure the device front panel to the chassis using the front-panel mounting screws.
Note
Tightening the top and bottom mounting screws increases mechanical
stability and also electrically connects the front panel to the chassis, which can
improve the signal quality and electromagnetic performance.
11. Cover all empty slots using filler panels or slot blockers to maximize cooling air flow.
12. Power on the chassis.
Related Information
on page 4
Interconnecting the NI 5663 Modules
Caution
The signal pins of this product's input/output ports can be damaged if
subjected to ESD. To prevent damage, remove power from the product before
6
|
ni.com
|
NI PXIe-5663 Getting Started Guide
Содержание NI PXIe-5663
Страница 1: ...PXIe 5663...