© 2011–2013 National Instruments. All rights reserved.
373369B-01
Dec13
Refer to the
NI Trademarks and Logo Guidelines
at
ni.com/trademarks
for more information on National Instruments trademarks. Other
product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National
Instruments products/technology, refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on your media, or the
National Instruments Patents Notice
at
ni.com/patents
. You can find information about end-user license agreements (EULAs) and third-party
legal notices in the readme file for your NI product. Refer to the
Export Compliance Information
at
ni.com/legal/export-compliance
for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data.
3.
Set the RF frequency to 4 GHz and commit the settings to hardware.
4.
Check the signal generation status and verify that there are no reported errors or warnings.
5.
After correcting for the measurement frequency, use the power meter to measure the LO3
output power.
6.
Ensure that the output power is between 9 dBm and 11 dBm.
7.
Close the device session.
Reverifying Other Device Performance Specifications
For all other device performance specifications, repeat the
section to determine the
as-left status of the device.
Worldwide Support and Services
The National Instruments website is your complete resource for technical support. At
you have access to everything from troubleshooting and application development
self-help resources to email and phone assistance from NI Application Engineers.
for NI Factory Installation Services, repairs, extended warranty, and
other services.
to register your National Instruments product. Product registration
facilitates technical support and ensures that you receive important information updates from NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the European
Communities using the manufacturer’s declaration of conformity. This system affords the user
protection for electromagnetic compatibility (EMC) and product safety. You can obtain the DoC
for your product by visiting
. If your product supports calibration,
you can obtain the calibration certificate for your product at
National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world. For
telephone support in the United States, create your service request at
or dial
512 795 8248. For telephone support outside the United States, visit the Worldwide Offices
section of
to access the branch office websites, which provide up-to-date
contact information, support phone numbers, email addresses, and current events.
