background image

©

 National Instruments Corporation

7

Getting Started with the NI PXI/PCIe-8231

Operating Environment

The NI 8231 is intended for indoor use only.

Ambient temperature range ...................................0 °C to 55 °C

Operating relative humidity

NI PXI-8231 ..................................................10% to 90%, noncondensing

NI PCIe-8231 .................................................50% to 85%, noncondensing

Pollution Degree ....................................................2

Caution

Do

 not

 use the NI 8231 for connection to signals within Measurement Categories II, III, 

or IV.

Approved at altitudes up to 2,000 m.

Storage Environment

Ambient temperature range

NI PXI-8231 ..................................................–20 °C to 70 °C

NI PCIe-8231 .................................................–40 °C to 70 °C

Relative humidity

NI PXI-8231 ..................................................5% to 95%, noncondensing

NI PCIe-8231 .................................................50% to 85%, noncondensing

Safety

This product is designed to meet the requirements of the following standards of safety:

IEC 60950-1, EN 60950-01

UL 60950-1, CSA 60950-1

Electromagnetic Compatibility

This product is designed to meet the requirements of the following standards of EMC for electrical 
equipment for measurement, control, and laboratory use:

FCC Part 15—Radiated and Conducted Emissions (USA)

ICES-003—Radiated and Conducted Emissions (Canada)

CISPR 22—Radiated and Conducted Emissions (International)

EN55022—Radiated and Conducted Emissions (European Union)

EN55024—(Immunity) (European Union)

VCCI—Radiated and Conducted Emissions (Japan)

CNS13438—Radiated and Conducted Emissions (Taiwan)

AS/NZS3548—Radiated and Conducted Emissions (Australia/New Zealand)

MIC notice 1997-41, EMI and MIC notice 1997-42—EMS (Korea)

CE Compliance

This product meets the essential requirements of applicable European Directives, as amended for 
CE marking, as follows:

73/23/EEC; Low-Voltage Directive (safety)

89/336/EEC; Electromagnetic Compatibility Directive (EMC)

Содержание NI PXI/PCIe-8231











Отзывы: