background image

Chapter 2

Installation and Configuration

NI PXI-8184/8185 User Manual

2-6

ni.com

DMI Event Logging Submenu

Major errors that occur during the BIOS booting process are stored in 
battery-backed memory on the controller, and remain there until you view 
and clear them using this submenu. This logging capability allows a system 
administrator to detect the historical occurrence of faults on a controller. 
This submenu includes the following items:

View DMI Event Log

—This setting displays a window containing 

all logged system errors and the time at which they occurred.

Mark Events as Read

—This setting prevents any current logged 

entries from being displayed again. However, all entries remain in 
battery-backed memory, and you can retrieve them using other 
DMI software that is beyond the scope of this document.

Clear All Events

—When set to 

Yes

, this setting clears all entries from 

the DMI event log on reboot.

Event Logging

—This setting controls whether events are logged. 

Disabling logging has no impact on system performance. The default 
is 

Enabled

Advanced Setup Menu

This menu contains BIOS settings that normally do not require 
modification. If you have specific problems such as unbootable disks 
or resource conflicts, you may need to examine these settings.

Caution

Changing settings in this menu may result in an unstable or unbootable controller. 

If this happens, follow the procedures outlined in the 

System CMOS

 section to restore 

BIOS settings to their factory defaults.

The 

Advanced

 setup menu includes the following settings:

Reset Configuration Data

—A portion of the EEPROM on the 

controller is designated as the Extended System Configuration Data 
region (ESCD). The BIOS and Plug-and-Play operating systems use 
this table to store the 

Last Known Good

 configuration of system 

peripherals. If you experience resource conflicts or peripheral 
malfunction, set this setting to 

Yes

 to force the BIOS to recreate the 

ESCD on the next reboot. This is rarely necessary.

Integrated Peripherals

—Use this setting to bring up the 

Integrated 

Peripherals

 submenu. (Refer to the 

Integrated Peripherals Submenu

 

section.)

Local Bus IDE Adapter

—The NI PXI-8184/8185 controller has 

two integrated IDE/ATA channels (Primary and Secondary), each 

Содержание NI PXI-8185









































































Отзывы: