©
National Instruments Corporation
17
NI PXI-5660 Getting Started Guide
NI 5600 RF Downconverter Module
The NI 5600 RF downconverter module front panel contains six connectors and two LEDs, as shown in
Figure 10.
Figure 10.
NI 5600 RF Downconverter Module Front Panel
Note
The PXI 10 MHz I/O connector can be used to route reference clock signals to the PXI
backplane
only
when the NI 5600 RF downconverter module is installed in PXI Slot 2. This
connector can export the PXI 10 MHz backplane clock from any NI 5600 PXI installation slot.
For more information about exporting reference clock signals, refer to the
NI PXI-5660 Help
.
INPUT
50
Ω
0 V DC M
AX
OUTPUT
50
Ω
5 MHz - 25 MHz
+20 dBm MAX
+
3
0 dBm MAX
WITH ATTN
PXI 10 MHz I/O
50
Ω
+2
3
dBm MAX
± 5 V DC MAX
10 MHz OUT
1 V pp 50
Ω
FREQ. REF IN
50
Ω
+16 dBm MAX
±5 V DC MAX
NI 5600
POWER
S
TATU
S
RF DOWNCONVERTER