Getting Started with the NI PCIe-8233
|
© National Instruments
|
7
•
Measurement Category III is for measurements performed in
the building installation at the distribution level. This category
refers to measurements on hard-wired equipment such as
equipment in fixed installations, distribution boards, and
circuit breakers. Other examples are wiring, including cables,
bus-bars, junction boxes, switches, socket-outlets in the fixed
installation, and stationary motors with permanent connections
to fixed installations.
•
Measurement Category IV is for measurements performed at
the primary electrical supply installation (<1,000 V).
Examples include electricity meters and measurements on
primary overcurrent protection devices and on ripple control
units.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory
requirements and limits for electromagnetic compatibility (EMC)
stated in the product specifications. These requirements and limits
provide reasonable protection against harmful interference when
the product is operated in the intended operational electromagnetic
environment.
