14
|
ni.com
|
Getting Started with the NI PCIe-8233
4. Choose an unused x4 or larger PCIe slot, and remove the
corresponding expansion slot cover on the back panel of the
computer.
5. Remove the device from the antistatic package and gently rock
the device into the PCIe slot. The connection may be tight, but
do
not
force the device into place.
Note
Check that the bracket of your device aligns with
the hole in the back panel rail of the computer chassis.
6. Secure the device mounting bracket to the back panel rail of the
computer.
7. This step is required to enable Power over Ethernet. Connect
an available 4-pin peripheral ATX power connector from the
computer’s power supply to the PoE power input on the device.
8. Replace the computer cover.
9. Connect an Ethernet cable to a GigE Vision camera, then
connect the camera to the NI 8233 front panel.
10. Plug in and power on the computer.
