National Instruments NI ELVIS III, Начало работы

Страница: 10 / 37

Note
The device does not need an ID when connected via USB. The OLED
display returns
ID not available
when you connect the device via USB
only.
Tip
Go to Setting up the Host Computer to set up the software
environment.
Tip
Go to Configuring the Device if you need to upgrade the software on
the device or set up an administrator password.
Connecting to the Device via Ethernet
Complete the following steps to use an Ethernet cable to connect the NI ELVIS III to
your host computer.
1. Connect the Ethernet cable to the NI ELVIS III as shown in the following figure:
2. Ensure that the Ethernet cable is connected to a router that is set up correctly.
ni.com
10
NI ELVIS III Getting Started