© 2015 National Instruments. All rights reserved.
375007A-01
Jan15
Refer to the
NI Trademarks and Logo Guidelines
at
ni.com/trademarks
for more information on National Instruments trademarks. Other
product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National
Instruments products/technology, refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on your media, or
the
National Instruments Patents Notice
at
ni.com/patents
. You can find information about end-user license agreements (EULAs) and
third-party legal notices in the readme file for your NI product. Refer to the
Export Compliance Information
at
ni.com/legal/
export-compliance
for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other
import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION
CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual
was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR
252.227-7014, and DFAR 252.227-7015.
the signal cable as close to the module as possible. Placing the ferrite elsewhere on the cable
noticeably impairs its effectiveness. Determine the clamp-on ferrite beads to install based on
your application.
Use the following ferrites or other similar ferrites:
•
Power cable: Laird 28A0592-0A2 (2 total)
•
Signal cable: Wurth Electronics 7427154 (2 total)
