![background image](http://html2.mh-extra.com/html/national-instruments/ni-9512/ni-9512_operating-instructions-manual_3395819021.webp)
©
National Instruments Corp.
21
NI 9512 Operating Instructions and Specifications
Axis Fault
The Axis Fa
u
lt LED (red) has two states to indicate the presence of
a fa
u
lt in the system. Refer to the
NI SoftMotion Module
book of
the
LabVIEW Help
for a list of mod
u
le fa
u
lts and tro
u
bleshooting
information.
•
Off
—No mod
u
le fa
u
lts.
•
Lit
—One or more mod
u
le fa
u
lts.
Sleep Mode
This mod
u
le s
u
pports a low-power sleep mode. S
u
pport for sleep
mode at the system level depends on the chassis that the mod
u
le is
pl
u
gged into. Refer to the chassis man
u
al for information abo
u
t
s
u
pport for sleep mode. If the chassis s
u
pports sleep mode, refer to
the software help for information abo
u
t enabling sleep mode. Visit
ni.com/info
and enter
c
s
erie
s
doc
for information abo
u
t
C Series doc
u
mentation.
Typically, when a system is in sleep mode, yo
u
cannot
comm
u
nicate with the mod
u
les. In sleep mode, the system
cons
u
mes minimal power and may dissipate less heat than it does
in normal mode. Refer to the
Specifications
section for more
information abo
u
t power cons
u
mption and thermal dissipation.