Activity LEDs
The NI 9469 has four front panel LEDs labeled Trig 0, Trig 1,
Trig 2, and Trig 3/Clk. The LEDs blink when activity is detected
on the corresponding line to or from the carrier.
Sleep Mode
This module supports a low-power sleep mode. Support for sleep
mode at the system level depends on the chassis the module is
plugged into. Refer to the chassis manual for information about
support for sleep mode. If the chassis supports sleep mode, refer
to the software help for information about enabling sleep mode.
Visit
ni.com/info
and enter
cseriesdoc
for information about
C Series documentation.
Typically, when a system is in sleep mode, you cannot
communicate with the modules. In sleep mode, the system
consumes minimal power and may dissipate less heat than it does
in normal mode. Refer to the
Specifications
section for more
information about power consumption and thermal dissipation.
16
|
ni.com
|
NI 9469 Getting Started Guide