NI cDAQ-9174/9178 USB Chassis Quick Start
NI-DAQmx installation and hardware setup
NI 9252 Getting Started Guide
NI 9252 connection information
NI 9252 Datasheet
NI 9252 circuitry and specifications
NI-DAQmx Readme
Operating system and application software support in NI-DAQmx
LabVIEW Help
LabVIEW programming concepts and reference information about NI-DAQmx VIs
and functions
NI-DAQmx C Reference Help
Reference information for NI-DAQmx C functions and NI-DAQmx C properties
NI-DAQmx .NET Help Support for Visual Studio
Reference information for NI-DAQmx .NET methods and NI-DAQmx .NET
properties, key concepts, and a C enum to .NET enum mapping table
Test Equipment
The following table lists the equipment recommended for the performance verification and
adjustment procedures. If the recommended equipment is not available, select a substitute
using the requirements listed.
Table 1.
Recommended Equipment
Equipment
Recommended Model
Requirements
Calibrator
Fluke 5502A
Use a high-precision DC voltage source
with a gain uncertainty of <57 ppm and an
offset uncertainty of <0.6 mV.
Chassis
NI cDAQ-9178
—
DSUB Connection
Accessory
1
NI 9923
—
1
For NI 9252 with DSUB variant
2
|
ni.com
|
NI 9252 Calibration Procedure
Содержание NI-9252
Страница 1: ...NI 9252...
