![background image](http://html1.mh-extra.com/html/national-instruments/ni-9214/ni-9214_operating-instructions-and-specifications_709228006.webp)
NI 9214 Operating Instructions and Specifications
6
ni.com
Special Conditions for Hazardous Locations Use in Europe
This eq
u
ipment has been eval
u
ated as Ex nA IIC T4 eq
u
ipment
u
nder DEMKO Certificate No. 07 ATEX 0626664X. Each mod
u
le
is marked
II 3G and is s
u
itable for
u
se in Zone 2 hazardo
u
s
locations, in ambient temperat
u
res of –40 °C
Ta
70 °C. If yo
u
are
u
sing the NI 9214 in Gas Gro
u
p IIC hazardo
u
s locations, yo
u
m
u
st
u
se the device in an NI chassis that has been eval
u
ated as
Ex nC IIC T4, EEx nC IIC T4, Ex nA IIC T4, or Ex nL IIC T4
eq
u
ipment.
Electromagnetic Compatibility Guidelines
This prod
u
ct was tested and complies with the reg
u
latory
req
u
irements and limits for electromagnetic compatibility (EMC)
as stated in the prod
u
ct specifications. These req
u
irements and
limits are designed to provide reasonable protection against
harmf
u
l interference when the prod
u
ct is operated in its intended
operational electromagnetic environment.
This prod
u
ct is intended for
u
se in ind
u
strial locations. There is no
g
u
arantee that harmf
u
l interference will not occ
u
r in a partic
u
lar
installation, when the prod
u
ct is connected to a test object, or if the
prod
u
ct is
u
sed in residential areas. To minimize the potential for
the prod
u
ct to ca
u
se interference to radio and television reception
NI_9214.fm Page 6 Monday, November 1, 2010 9:52 AM