Connecting Wires to a Spring-Terminal
Connector
What to Use
•
NI 9213 spring-terminal connector
•
0.8 mm
2
to 1.0 mm
2
(28 AWG to 18 AWG) copper conductor
wire with 7 mm (0.276 in.) of insulation stripped from the
end
•
Flathead screwdriver with a 2.3 mm x 1.0 mm (0.09 in. x
0.04 in.) blade, included with the NI 9213
What to Do
Complete the following steps to connect wires to the spring-
terminal connector.
NI 9213 Getting Started Guide
|
© National Instruments
|
13
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
