National Instruments NI 9212, Руководство пользователя

Страница: 12 / 16

■
Screwdriver
What to Do
1
1
2
3
1. Connect the TB-9212 with screw terminal to the NI 9212 front connector.
2. Tighten the jackscrews to a maximum torque of 0.4 N · m (3.6 lb · in.). Do not
overtighten the jackscrews.
Wiring the TB-9212 with screw terminal
What to Use
■
TB-9212 with screw terminal
■
0.05 mm to 0.5 mm (30 AWG to 20 AWG) wire with 5.1 mm (0.2 in.) of the
inner insulation stripped and 51 mm (2.0 in.) of the outer insulation stripped
■
Zip tie
■
Screwdriver
What to Do
ni.com
12
NI-9212