Chapter 2
Installation and Configuration
©
National Instruments Corporation
2-7
Standard CMOS Features
Use the arrow keys to navigate the options in the Standard CMOS
Features menu and use <Page Up> or <Page Down> to switch to the value
you prefer.
Date (mm:dd:yy)
Use this menu to set the system date. The format is <day> <month> <date>
<year>.
day
The day is determined by the BIOS and is
read only.
month
Select the month using <Page Up> and
<Page Down>.
date
Select the date using <Page Up> and
<Page Down>.
year
Select the year using <Page Up> and
<Page Down>.
Time (hh:mm:ss)
Use this menu to set the system time. The time format is <hour> <minute>
<second>.
IDE Primary/Secondary Master/Slave
Press <Page Up> or <Page Down> to select Manual, None, or Auto. Your
hard disk specifications must match the drive table. The hard disk will not
work properly if you enter improper information in this menu. If your hard
disk drive type is not matched or listed, use Manual to define your own
drive type manually.
If you select Manual, you must enter the following related information.
This information should be in the hard disk or system documentation.
Access Mode
The settings are CHS, LBA, Large, and
Auto
Capacity
The formatted size of the storage device
Cylinder
The number of cylinders
