National Instruments NI-7931, Руководство по началу работы

Страница: 6 / 19

What You Need to Get Started
• The NI-7932R shipping kit, which includes the following components:
–
The NI-7932R device
– FlexRIO Support DVD
Note
FlexRIO Support 15.1 is the earliest supported driver for the
NI-7932R.
– NI-7932R Getting Started Guide (this document)
– Power screw terminal connector plug
– A to Mini-B device port USB cable
• A host computer running Windows, with NI software installed in the following order:
Note
Visit ni.com/info and enter the Info Code
rdsoftwareversion
to
determine which software versions you need to use the NI-7932R and
supported FlexRIO adapter modules.
– LabVIEW
– LabVIEW Real-Time
– LabVIEW FPGA
– FlexRIO Support
1
• A DC power supply as described in the NI-7932R Specifications
• A FlexRIO adapter module or custom adapter module (optional)
• A number 2 Phillips screwdriver
• A number 1 Phillips screwdriver
• A small flat-blade screwdriver
• Straight through shielded Ethernet cable (if connecting to a network) or crossover
shielded Ethernet cable (if connecting directly to a PC)
Unpacking the Kit
Caution
To prevent electrostatic discharge (ESD) from damaging the device,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Never touch the exposed pins of connectors.
1
LabVIEW 2015, FlexRIO Support 2015, LabVIEW Real-Time 2015, and LabVIEW FPGA 2015
are the earliest versions of software that support the NI-7932R.
NI-7932R Getting Started Guide | © National Instruments | 5