National Instruments NI 6585 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 14

National Instruments NI 6585 Скачать руководство пользователя страница 5

Preparing the Environment

Ensure that the environment you are using the NI 6585/6585B in meets the following
specifications.

Operating temperature (IEC 60068-2-1,
IEC 60068-2-2)

0 °C to 55 °C

Operating humidity (IEC 60068-2-56)

10% to 90% RH, noncondensing

Pollution Degree

2

Maximum altitude

2,000 m at 25 °C ambient temperature

Indoor use only.

Note

Refer to the

NI 6585/6585B Specifications

at

ni.com/manuals

specifications.

Caution

Clean the hardware with a soft, nonmetallic brush. Make sure that the

hardware is completely dry and free from contaminants before returning it to
service.

Installing the NI 6585/6585B

Refer to the getting started guide for your FlexRIO FPGA module or Controller for FlexRIO
for instructions about how to install your FlexRIO system, including the NI 6585/6585B.

Confirming that Measurement & Automation
Explorer (MAX) Recognizes the Device

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which devices reside in the system and how they are configured.
MAX is automatically installed with FlexRIO Support.
1.

Launch MAX by navigating to

Start

»

All Programs

»

National Instruments

»

NI MAX

or

by clicking the NI MAX desktop icon.

2.

In the Configuration pane, double-click

Devices and Interfaces

to see the list of installed

devices. Installed devices appear under the name of their associated chassis.

3.

(PXI and PXI Express devices only) Expand your

Chassis

tree item. MAX lists all

devices installed in the chassis. Your default device names may vary.

Note

If you do not see your hardware listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure
the device is correctly installed, and restart.

4.

(Controllers for FlexRIO only) Your device appears under the

Remote Devices

section.

NI 6585/6585B Getting Started Guide

|

© National Instruments

|

5

«
...
3
4
5
6
7
...
»

Содержание NI 6585















Отзывы:

Нет отзывов