National Instruments NI 6581, Руководство по началу работы

Страница: 14 / 23

2. Install the LabVIEW FPGA Module.
Refer to the LabVIEW FPGA Module Release and Upgrade Notes for installation
instructions and information about getting started with the LabVIEW FPGA Module.
Documentation for the LabVIEW FPGA Module is available at ni.com/manuals and by
selecting
Start
»
All Programs
»
National Instruments
»
LabVIEW
»
LabVIEW
Manuals .
3. (Optional) Install the LabVIEW Real-Time Module.
Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for system
requirements, installation instructions, and additional information about using the
LabVIEW Real-Time Module.
4. Install NI FlexRIO.
Refer to the NI FlexRIO Readme on the NI FlexRIO installation media for system
requirements and installation instructions for NI FlexRIO Support. Documentation for
NI FlexRIO Support is available at ni.com/manuals and by selecting Start » All
Programs
»
National Instruments
»
NI FlexRIO
.
Note
If you are not using an adapter module, skip step 5.
5. Install NI FlexRIO Adapter Module Support.
Refer to the
NI FlexRIO Adapter Module Support Readme
on the NI FlexRIO Adapter
Module Support installation media for system requirements and installation instructions.
Documentation for NI FlexRIO Adapter Module Support is available at ni.com/manuals
and by selecting Start » All Programs » National Instruments » NI FlexRIO » NI FlexRIO
Adapter Module Documentation .
Installing the NI FlexRIO Devices
Note
You must install the software before installing the hardware.
Unpacking
The NI 6581/6581B modules ship in antistatic packages to prevent electrostatic discharge from
damaging module components. To prevent such damage when handling the modules, ground
yourself using a grounding strap or by holding a grounded object, such as your computer
chassis, and complete the following steps:
1. Touch the antistatic package to a metal part of the computer chassis before removing the
module from the package.
Caution
Never touch the exposed pins of connectors.
2. Remove each module from the package and inspect it for loose components or any other
sign of damage.
Notify NI if the modules appear damaged in any way. Do not install a damaged module into
the chassis.
NI 6581/6581B Getting Started Guide | © National Instruments | 13