![background image](http://html1.mh-extra.com/html/national-instruments/ni-5762/ni-5762_user-manual-and-specifications_3413189003.webp)
NI 5762R User Guide and Specifications
2
ni.com
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC) as stated in the product specifications. These requirements and limits are designed
to provide reasonable protection against harmful interference when the product is operated in its
intended operational electromagnetic environment.
This product is intended for use in industrial locations. There is no guarantee that harmful interference
will not occur in a particular installation, when the product is connected to a test object, or if the product
is used in residential areas. To minimize the potential for the product to cause interference to radio and
television reception or to experience unacceptable performance degradation, install and use this product
in strict accordance with instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, you must install PXI EMC Filler Panels
(National Instruments part number 778700-01) in adjacent chassis slots. For more information about
installing PXI EMC filler panels on your NI 5762R, refer to the
Appendix: Installing EMI Controls
section of this document.
Caution
To ensure the specified EMC performance, operate this product only with shielded cables
and accessories.
Caution
To ensure the specified EMC performance, install the included snap-on ferrites (National
Instruments part number 711856-01) on any cable attached to the AUX I/O connector in accordance
with the instructions listed in the
Appendix: Installing EMI Controls
Caution
This product is sensitive to electrostatic discharge (ESD). To ensure the specified EMC
performance, follow the programming instructions listed at the end of the
and
Creating a LabVIEW Project and Running a VI on an FPGA
sections of this document.
Содержание NI 5762
Страница 1: ...NI 5762...