National Instruments NI 5731 Series Скачать руководство пользователя | Manualshive

Страница: 2 / 43

background image

NI 5731/5732/5733/5734R User Guide and Specifications

2

ni.com

Note

Before configuring your NI 5731/5732/5733/5734R, you must install the appropriate software

and hardware. Refer to the

NI FlexRIO FPGA Module Installation Guide and Specifications

for

installation instructions. Figure 1 shows an example of a properly connected NI FlexRIO device.

Figure 1.

NI FlexRIO Device

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC) as stated in the product specifications. These requirements and limits are designed
to provide reasonable protection against harmful interference when the product is operated in its
intended operational electromagnetic environment.

This product is intended for use in industrial locations. There is no guarantee that harmful interference
will not occur in a particular installation, when the product is connected to a test object, or if the product
is used in residential areas. To minimize the potential for the product to cause interference to radio and
television reception or to experience unacceptable performance degradation, install and use this product
in strict accordance with instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.

Caution

To ensure the specified EMC performance, you must install PXI EMC Filler Panels

(National Instruments part number 778700-01) in adjacent chassis slots. For more information about
installing PXI EMC filler panels in your system, refer to the

Appendix: Installing EMI Controls

section of this document.

Caution

To ensure the specified EMC performance, operate this product only with shielded cables

and accessories.

Caution

To ensure the specified EMC performance, install the included snap-on ferrite bead

(National Instruments part number 711856-01) on any cable attached to the AUX I/O connector in
accordance with the instructions listed in the

Appendix: Installing EMI Controls

section.

Caution

This product is sensitive to electrostatic discharge (ESD). To ensure the specified EMC

performance, follow the programming instructions listed at the end of the

Using Your Device with a

LabVIEW FPGA Example VI

and

Creating a LabVIEW Project and Running a VI on an FPGA

sections of this document.

NI FlexRIO

Adapter Module

+

=

NI FlexRIO Device

NI FlexRIO

FPGA Module

«
1
2
3
4
...
»

Содержание NI 5731 Series












































Отзывы:

Нет отзывов

Похожие инструкции для NI 5731 Series

Бренд: ICS Schneider Messtechnik Страницы: 40

Бренд: DAKOTA ULTRASONICS Страницы: 38

Dusty Harp Pickup Series

Бренд: Dusty Strings Страницы: 5

OPTIFLUX 4040 C Series

Бренд: KROHNE Страницы: 20

SENSITRON SMART S

Бренд: Halma Страницы: 12

Бренд: Quarton Страницы: 2

Бренд: Horiba Scientific Страницы: 2

Бренд: SensorLink Страницы: 12

IEM-100 Beltpack

Бренд: DAPAudio Страницы: 17

Бренд: Ratek Страницы: 24

Бренд: Oldham Страницы: 106

Бренд: Alpes Lasers Страницы: 41

Бренд: Thermo Scientific Страницы: 56

Бренд: Velleman Страницы: 15

Бренд: Oceanic Страницы: 114

Бренд: Carman Страницы: 64

Бренд: IFM Страницы: 45

Бренд: R&S Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды