Getting Started with the NI 17xx
14
ni.com
Configuring the NI Smart Camera
with LabVIEW
Complete the following steps to install LabVIEW, the LabVIEW
Real-Time Module, the NI Vision Development Module, and
NI Vision Acquisition Software and configure the NI Smart
Camera. Install the software in the following order:
1.
LabVIEW
—Refer to the
LabVIEW Release Notes
for
installation instructions for LabVIEW and system
requirements for the LabVIEW software. Refer to the
LabVIEW Upgrade Notes
for additional information about
upgrading to the most recent version of LabVIEW.
Documentation for LabVIEW is available by selecting
Start»All Programs»National Instruments»LabVIEW»
LabVIEW Manuals
.
2.
LabVIEW Real-Time Module
—Refer to the
LabVIEW
Real-Time Module Release and Upgrade Notes
for installation
instructions and information about getting started with the
LabVIEW Real-Time Module.
Documentation for the LabVIEW Real-Time Module is
available by selecting
Start»All Programs»National
Instruments»LabVIEW»LabVIEW Manuals
.
3.
NI-IMAQ
—Refer to the
NI Vision Acquisition Software
Release Notes
on the NI Vision Acquisition Software
installation media for system requirements and installation
instructions for the NI-IMAQ driver.
Documentation for the NI-IMAQ driver software is available
by selecting
Start»All Programs»National Instruments»
Vision»Documentation»NI-IMAQ
.
4.
NI Vision Development Module
—Refer to the
NI Vision
Development Module Readme
on the NI Vision Development
Module installation media for system requirements and
installation instructions.
Documentation for the NI Vision Development Module is
available by selecting
Start»All Programs»National
Instruments»Vision»Documentation»NI Vision
.
