©
National Instruments Corporation
3
NI 1483R User Guide and Specifications
Unpacking
The NI FlexRIO FPGA module and the NI 1483 are shipped in antistatic packages to prevent
electrostatic discharge from damaging device components. To prevent such damage when handling
the device, take the following precautions:
•
Ground yourself using a grounding strap or by holding a grounded object, such as your computer
chassis.
•
Touch the antistatic package to a metal part of the computer chassis before removing the device
from the package.
Caution
Never
touch the exposed pins of connectors.
Remove the device from the package and inspect the devices for loose components or any other sign
of damage. Notify National Instruments if the device appears damaged in any way. Do
not
install a
damaged device into the chassis.
Store the NI FlexRIO FPGA module and NI 1483 in the antistatic envelopes when not in use.
Installing the NI FlexRIO FPGA Module
Complete the following steps to install an NI FlexRIO FPGA module:
Note
You must install the software before installing the hardware. For software installation
Step 1. Install Application Software and Driver
.
Caution
Refer to the
Read Me First: Safety and Electromagnetic Compatibility
document packaged
with your PXI/PXI Express chassis or device before removing equipment covers or connecting or
disconnecting any signal wires.
1.
Power off and unplug the PXI/PXI Express chassis. Refer to your chassis manual to install or
configure the chassis.
2.
Identify a supported PXI/PXI Express slot in the chassis. Figure 2 shows the symbols that indicate
the slot types for a PXI/PXI Express chassis.
Figure 2.
Symbols for PXI Express/PXI Express Hybrid/PXI Slots
1
PXI Express System Controller Slot
2
PXI Peripheral Slots
3
PXI Express Hybrid Peripheral Slots
4
PXI Express Peripheral Slots
5
PXI Express System Timing Slot
18
17
16
15
13
12
11
10
9
8
7
6
5
4
3
2
NI PXIe-1065
3
1
H
14
H
H
H
2
2
3
4
5
1
Содержание NI 1483
Страница 1: ...NI 1483...