![background image](http://html2.mh-extra.com/html/national-instruments/mxi-2/mxi-2_getting-started_3413085040.webp)
Chapter A
Default Settings — VXI/VME-MXI-2
©
National Instruments Corporation
A-7
PCI-Based MXI-2 Interface for Windows
MAX Settings
Table A-11.
Device Tab Default Settings
Editor Field
Default Setting
Logical address
Use DIP switch
Address space
A24*
Requested memory
16 KB*
A24/A32 write posting
Disabled
A16 write posting
Disabled
Interlocked mode
Disabled
* Assumes no DRAM is installed. If DRAM is installed, the Address space should be
A32, and Requested memory should match the amount of DRAM. If you install the
DRAM yourself, you must manually specify these changes.
Table A-12.
VXI/VME Bus Tab Default Settings
Editor Field
Default Setting
Bus timeout value
125
µ
s
Slot 0 configuration
Auto-detect
Auto retry
Disabled
Transfer limit
256
Arbiter type
Priority
Fair requester
Enabled
Arbiter timeout
Enabled
Request level
3