![background image](http://html2.mh-extra.com/html/national-instruments/mxi-2/mxi-2_getting-started_3413085037.webp)
Chapter A
Default Settings — VXI/VME-MXI-2
PCI-Based MXI-2 Interface for Windows
A-4
ni.com
VXI/VME-MXI-2
This section summarizes the hardware and software default settings for the
VXI-MXI-2, VXI-MXI-2/B, and VME-MXI-2.
Hardware Settings
A24/A32 write posting
Disabled
VXImove uses Synchronous
MXI
Enabled
MXI transfer limit
Unlimited
MXI CLK10 signal
Receive
Table A-7.
PCI Tab Default Settings
Editor Field
Default Setting
Low-level register access API
support
Enabled
User window size
64 KB
Expansion ROM
Enabled
Table A-8.
VXI-MXI-2 Hardware Default Settings
Hardware Component
Default Setting
Logical address (U43)
1
VXIbus Slot 0/Non-Slot 0 (W2)
Automatic detection
VXIbus local bus (S8, S9)
Both OFF: single VXI-MXI-2
VXIbus CLK10 routing (W3)
From onboard oscillator
Table A-6.
MXI-2 Bus Tab Default Settings (Continued)
Editor Field
Default Setting