manualshive.com logo in svg

National Instruments Measure Data Acquisition, Руководство пользователя, Страница: 68 / 98

Поделиться
Скачать
National Instruments Measure Data Acquisition Скачать руководство пользователя страница 68

Appendix B   Error Codes

© National Instruments Corporation

B-15

Measure Data Acquisition User Manual

-10701

noLaterUpdateError

The call had no effect because the
specified channel had not been set for
later internal update.

-10702

prePostTriggerError

Pretriggering and posttriggering
cannot be used simultaneously on the
Lab and 1200 series devices.

-10710

noHandshakeModeError

The specified port has not been
configured for handshaking.

-10720

noEventCtrError

The specified counter is not configured
for event-counting operation.

-10740

SCXITrackHoldErr

A signal has already been assigned to
the SCXI track-and-hold trigger line,
or a control call was inappropriate
because the specified module was not
configured for one-channel operation.

-10780

sc2040InputModeErr

When you have an SC2040 attached to
your device, all analog input channels
must be configured for differential
input mode.

-10781

outputTypeMustBeVoltageEr
ror

The polarity of the output channel
cannot be bipolar when outputting
currents.

-10782

sc2040HoldModeError

The specified operation cannot be
performed with the SC-2040
configured in hold mode.

-10783

calConstPolarityConflictE
rror

Calibration constants in the load area
have a different polarity from the
current configuration. Therefore, you
should load constants from factory.

-10800

timeOutErr

The operation could not complete
within the time limit.

-10801

calibrationErr

An error occurred during the
calibration process.

-10802

dataNotAvailErr

The requested amount of data has not
yet been acquired.

-10803

transferStoppedErr

The transfer has been stopped to
prevent regeneration of output data.

-10804

earlyStopErr

The transfer stopped prior to reaching
the end of the transfer buffer.

Содержание Measure Data Acquisition



































































































Отзывы:

Нет отзывов