National Instruments IVN-8561, Начало работы

Страница: 10 / 12

Connector Pin Signal
1 2
2 100BASE-T1 Negative (-)
Table 2. 100BASE-T1 Terminal Block Pin Assignments
Connector Pin Signal
1
2
3
4
5
6
7
8
1 T
2 Transmit-
3
4 No Connection (NC)
5 NC
6 Receive-
7 NC
8 NC
Table 3. 100BASE-TX RJ45 Pin Assignments
Connecting the IVN-8561
Connect the IVN-8561.
1. Use twisted pair cable and the provided terminal blocks to connect your
100BASE-T1 network to ports 1 or 3 of the IVN-8561.
2. Use a Cat 5e Ethernet cable to connect 100BASE-TX network to ports 2 or 4 of
the IVN-8561.
Note
100 Mbit link speed must be selected for ports 2 and 4,
indicated by the LED next to the port.
3. Connect one end of the USB power cable to the IVN-8561, and connect the
other end to a standard USB 3.0 port.
4. Optionally, use the ground screw on the IVN-8561 to attach a ground cable.
ni.com
10
IVN-8561 Getting Started