Power Requirements
Input voltage range
5 VDC nominal; USB 3.0 Type C
Max power consumption
2.8 W
Preparing the Environment
Ensure that the environment in which you are using the IVN-8561 meets the following
specifications.
Ambient temperature range
-20 °C to 55 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range
10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
Maximum Altitude
2,000 m (800 mbar)
Pollution Degree
2
Indoor use only.
Note
Refer to the device specifications on
http://www.ni.com/manuals
for complete
specifications.
Hardware Overview
The IVN-8561 has a total of four communication ports, and one USB port for power.
Ports 1 and 3 are 100BASE-T1 ports for Automotive Ethernet connections using two-position
terminal blocks. Ports 2 and 4 are 100BASE-TX ports for Ethernet connections using 8-pin,
modular RJ-45 connectors.
The 100BASE-T1 interfaces use an NXP TJA1100 100 Mbit/s BroadR-Reach-compliant PHY.
Weidmuller OMNIMATE SL-SMT 3.50/02/90LF terminal block headers are used to connect
to these ports. Compatible plugs are included with the IVN-8561.
Each 100BASE-T1 port can be configured as master or slave, using switches on the front
panel.
The power connector is USB Type-C. Use the USB cable (Type-C to Type-A) included with
the IVN-8561 to power the device from a standard USB 3.0 port on your computer or
industrial controller. The IVN-8561 can be powered from the USB port of any NI PXI,
CompactRIO, or industrial controller.
4
|
ni.com
|
IVN-8561 Getting Started Guide
