National Instruments IMAQ PCI-1409, Руководство пользователя

Страница: 52 / 55

© National Instruments Corporation I-1 IMAQ PCI/PXI-1409 User Manual
Index
Numbers
+5V signal (table), 4-3
10-bit ADC, 3-2
10-bit ADC and LUT, 3-3
A
acquisition and region-of-interest control,
3-3 to 3-4
A/D conversion specifications, A-2
ADC, 10-bit, 3-2
analog bandwidth control circuitry, 3-2
analog front end considerations, 3-5
antichrominance filter, 3-3
aspect ratio.
See pixel aspect ratio.
B
BNC connector
avoiding VIDEO0 connection with 68-pin
VHDCI connector (note), 4-1
pin assignments (figure), 4-1
signal connections, 4-1
VIDEO0 input, 2-6
board configuration. See configuration.
C
cables
custom cable specifications, B-1
optional equipment, 2-2
required cables, 2-1
CompactPCI specifications, 1-2
composite synchronization.
See CSYNC.
configuration, 2-4 to 2-8. See also installation.
parts locator diagram, 2-5
setting up IMAQ system, 2-2 to 2-3
VIDEO0 input mode, 2-6 to 2-7
CSYNC
CSYNC mux, 3-3
external acquisition mode, 3-4
CSYNCIN± signal (table), 4-3
CSYNCOUT signal (table), 4-4
custom cable specifications, B-1
D
DIFF input mode
VIDEO0 input, 2-6
DMA controllers, 3-3
E
environment specifications, A-3 to A-4
equipment, optional, 2-2
external lock mode
description, 3-4
F
formats supported, A-1
front end considerations, 3-5
functional overview, 3-1 to 3-4
G
gain and offset circuitry, programmable, 3-2
genlock and synchronization circuitry, 3-3
GND signal (table), 4-4