IMAQ A8014 Installation Guide
2
ni.com
Connecting the IMAQ A8014 Cable
Complete the following steps to connect the IMAQ A8014 cable to the
IMAQ 1409/1410 device and camera. Refer to Figure 1 for an illustration
of the IMAQ A8014 cable.
1.
Connect the 68-pin male VHDCI connector to the connector on the
IMAQ 1409/1410 device and tighten the thumbscrews.
2.
Connect the 12-pin male Hirose connector to the camera power supply.
3.
Connect the 12-pin female Hirose connector to the input receptacle on
the camera.
Optional Connections
1.
Connect the external trigger to the
Ext. Trig 0
BNC.
2.
Connect any device requiring general-purpose digital input/output,
such as a strobe light, to the
Ext. Trig 1
BNC.
Figure 1.
IMAQ A8014 Cable
Connectors
The 68-pin VHDCI connector provides connection to the
IMAQ 1409/1410 device, and the 12-pin Hirose connectors provide
connection to the camera. Figures 2 and 3 show the pinouts for these
connectors.
1
68-Pin Male VHDCI Connector
2
12-Pin Male Hirose Connector
3
12-Pin Female Hirose Connector
4
Ext. Trig 0
5
Ext. Trig 1
NATIONAL INSTRUMENTS
1
2
3
4
5
