manualshive.com logo in svg

National Instruments GPIB-PC, Руководство пользователя

Поделиться
Скачать
National Instruments GPIB-PC Скачать руководство пользователя страница 35

Installation and Configuration

Section Two

GPIB-PC User Manual

2-10

©National Instruments Corp.

IBCONF

 makes changes to the 

GPIB.COM

 file, which should also be in

the root directory.  If you want 

IBCONF

 to make changes to a different

copy of 

GPIB.COM

 such as 

GPIB2.COM

, enter the path and name of

the 

GPIB.COM

 file you want modified:

ibconf c:\GPIB-PC\GPIB2.COM

This will have the effect of changing the parameters within the

GPIB2.COM

 file in the 

GPIB-PC

 subdirectory.

Modify only the copy of 

GPIB.COM

 created by 

IBSTART

 in your boot

directory.  Never modify the master copy on the distribution diskette.
This would happen if you ran 

IBCONF

 from the distribution diskette and

if the distribution diskette were not write-protected.

Upper and Lower Levels of 

IBCONF

IBCONF

 operates at both an upper and a lower level.  The upper level

consists of the Device Maps and gives an overview of the GPIB system
as defined within the handler being configured.  The lower level consists
of screens that describe each individual board and device in the system.

Upper Level - Device Map for Board 

GPIBx

This screen displays the names of all devices defined in the handler file,
and indicates which devices, if any, are accessed through the interface
board 

GPIBx

.  At this level, you may:

•

Rename a device;

•

Disconnect a device from its assigned GPIB-PC access board or
connect (reassign) it to a different access board; or

•

Proceed to the lower level to edit or examine the
characteristics of a particular board or device.

Instructions are given on the screen for selecting the individual devices
and for changing from one device map to another, for example, from the
map for 

GPIB0

 to that for 

GPIB1

.

Содержание GPIB-PC







































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды