![background image](http://html.mh-extra.com/html/national-instruments/gpib-device-simulator-eprom/gpib-device-simulator-eprom_programming-manual_710200012.webp)
© National Instruments Corp.
9
GPIB Device Simulator EPROM
Compatibility Commands
The new Simulator EPROM supports the following commands for
compatibility with the older EPROM. However, if multiple commands are
sent together, they must be separated using a semicolon (;).
E0xh0
(E zero, x, mask in hex) Causes the box to assert SRQ
whenever it has finished generating data in response to a W
command. The serial poll status is specified in h0.
E0x0
(E zero, x, zero) Disables asserting SRQ
G0
Output data as 2-byte integers
G1
Output data as ASCII floats separated by a comma
G2
Output data as ASCII floats separated by a comma
W1
Output a noisy square wave
W2
Output a sine wave
W3
Output a noisy sine wave
W4
Output random data
W5
Output a chirp waveform
Od0
(Letter O) Out put d0 random 2-byte integers one at a time